1.吸附阶段：VOC有机废气经过沸石转轮吸附后直接达标排放，原理是沸石分子筛由于孔径的大小能根据废气分子的大小和极性的不同进行选择性吸附，即使废气成分的浓度很低仍具有较高的吸附能力，且在高温下仍具有很强的吸附能力，这是其他吸附材质不具备的特性。

1. Adsorption stage: VOC organic waste gas is directly discharged after being adsorbed by a zeolite wheel. The principle is that zeolite molecular sieve can selectively adsorb according to the size and polarity of waste gas molecules due to its pore size. Even if the concentration of waste gas components is low, it still has high adsorption capacity and strong adsorption capacity at high temperatures, which is a characteristic that other adsorption materials do not possess.

2.脱附阶段：沸石转轮始终保持着缓慢的旋转，在废气处理区吸附饱和后，在再生区把吸附在沸石分子筛里的有机废气通过高温热空气吹扫脱附出来。热空气的温度根据废气的成分而设定，沸石分子筛吸附的特点就是，脱附时可保持较高的脱附温度因而适用于很多沸点较高的废气成分，这一点是活性炭吸附所达不到的。

2. Desorption stage: The zeolite wheel always maintains a slow rotation. After adsorption saturation in the waste gas treatment zone, the organic waste gas adsorbed in the zeolite molecular sieve is blown and desorbed by high-temperature hot air in the regeneration zone. The temperature of hot air is set according to the composition of the exhaust gas. The characteristic of zeolite molecular sieve adsorption is that it can maintain a high desorption temperature during desorption, making it suitable for many exhaust gas components with high boiling points, which activated carbon adsorption cannot achieve.

3.RTO氧化阶段：沸石转轮实际上是个浓缩装置，把低浓度大风量有机废气里的分子捕捉、富集到沸石分子筛上面。当脱附时就能用很小的热风从沸石分子筛中把废气分子吹扫出来。这时脱附出来的高浓度小风量废气就可直接进入RTO中进行高温焚烧。由于出来的废气浓度较高且风量较小，因此可选用更小规格尺寸的RTO焚烧炉，同时处理较高浓度废气能使RTO炉内达到自持燃烧，这样可以降低RTO设备运行时的能耗。

3. RTO oxidation stage: The zeolite wheel is actually a concentration device that captures and enriches molecules from low concentration and high air volume organic waste gas onto the zeolite molecular sieve. When desorbing, a small amount of hot air can be used to blow out the waste gas molecules from the zeolite molecular sieve. At this point, the high concentration and low airflow exhaust gas desorbed can directly enter the RTO for high-temperature incineration. Due to the high concentration and low air volume of the exhaust gas, a smaller size RTO incinerator can be selected. At the same time, treating the high concentration exhaust gas can achieve self-sustaining combustion inside the RTO furnace, which can reduce the energy consumption during the operation of the RTO equipment.

4.沸石转轮恢复阶段：沸石转轮脱附区经高温再生后会使沸石分子筛温度升高，这样会使吸附效果变差。因而要对经过高温吹扫过的区域用补冷风机进行降温处理，降温后的沸石分子筛又会恢复原有的吸附能力，这样周而复始循环往复地进行废气处理。

4. Recovery stage of zeolite wheel: After high-temperature regeneration in the desorption zone of zeolite wheel, the temperature of zeolite molecular sieve will increase, which will deteriorate the adsorption effect. Therefore, it is necessary to use a supplementary cooling fan to cool down the area that has been blown by high temperature. After cooling, the zeolite molecular sieve will restore its original adsorption capacity, and this process will be repeated repeatedly for waste gas treatment.

本文由沸石转轮＋RTO 友情奉献.更多有关的知识请点击:http://www.tdyhhb.com真诚的态度.为您提供为全面的服务.更多有关的知识我们将会陆续向大家奉献.敬请期待.

This article is contributed by the zeolite wheel and RTO friendship For more information, please click: http://www.tdyhhb.com Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.