一辆汽车进厂保养或维修，可能会产生废机油、废滤芯、废刹车片、废油漆桶、废电池等多种危险废物。这些“危险垃圾”如果随意堆放或非法倾倒，将对土壤和地下水造成严重污染。汽保行业（汽车维修保养行业）的危废暂存库，正是解决这一问题的关键设施。

A car entering the factory for maintenance or repair may generate various hazardous wastes such as waste engine oil, waste filter cartridges, waste brake pads, waste paint buckets, and waste batteries. If these 'dangerous wastes' are piled up or illegally dumped, they will cause serious pollution to soil and groundwater. The hazardous waste temporary storage facility in the automotive maintenance industry is the key facility to solve this problem.

汽保行业产生的危险废物种类繁多、成分复杂。根据《国家危险废物名录（2025年版）》，汽修行业产生的废机油、废铅酸电池、废滤芯、废漆渣、废溶剂、含油抹布等均属于危险废物。这些废物具有易燃性、毒性或腐蚀性，建议按照规范进行收集、贮存和处置。汽修企业建议设立独立的、符合安全与环保要求的危险废物贮存间，贮存场所建议做到“三防”——防流失、防扬散、防渗漏。

The hazardous waste generated by the automotive maintenance industry is diverse in types and complex in composition. According to the National Hazardous Waste List (2025 Edition), waste engine oil, waste lead-acid batteries, waste filter cartridges, waste paint residue, waste solvents, oily rags, and other waste generated by the automotive repair industry are all classified as hazardous waste. These wastes are flammable, toxic, or corrosive and must be collected, stored, and disposed of in accordance with regulations. Auto repair enterprises must establish independent hazardous waste storage rooms that meet safety and environmental protection requirements, and the storage sites must achieve "three preventions" - preventing loss, scattering, and leakage.

在具体建设要求方面，汽保行业危废暂存库需满足以下标准：机动车维修单位危险废物年产生量10吨及以上的，应单独建造危险废物贮存库，贮存库污染控制要符合《危险废物贮存污染控制标准》（GB18597）相关要求；危险废物年产生量10吨以下的，应设置危险废物贮存点，做好隔离、防风、防雨、防晒措施，同时危险废物应置于容器或包装物中，并设置托盘等防渗、防漏装置。不同类别的危险废物应分类存放、标识清晰。危废暂存间前应张贴规定的标识和应急措施（如防泄漏托盘、灭火设备）。

In terms of specific construction requirements, the temporary storage of hazardous waste in the automotive maintenance industry must meet the following standards: if the annual production of hazardous waste by motor vehicle maintenance units is 10 tons or more, a separate hazardous waste storage warehouse should be built, and the pollution control of the storage warehouse should comply with the relevant requirements of the "Pollution Control Standards for Hazardous Waste Storage" (GB18597); For hazardous waste with an annual output of less than 10 tons, hazardous waste storage points should be set up, and isolation, windproof, rainproof, and sun protection measures should be taken. At the same time, hazardous waste should be placed in containers or packaging materials, and anti-seepage and leak proof devices such as pallets should be installed. Hazardous waste of different categories should be stored separately and clearly labeled. The designated signs and emergency measures (such as leak proof trays and fire extinguishing equipment) should be posted in front of the hazardous waste temporary storage room.

近年来，各地生态环境部门对汽修行业的危废管理日益重视。多地生态环境部门联合交通部门开展汽车维修行业危险废物管理专项整治行动，核心核查危险废物“收集、贮存、管理、转运、处置”五大环节。这些举措正在推动汽保行业危废管理从“粗放”走向“规范”。

In recent years, ecological and environmental departments in various regions have increasingly attached importance to the management of hazardous waste in the automotive repair industry. Multiple ecological and environmental departments have joined forces with transportation departments to carry out a special rectification action on hazardous waste management in the automotive maintenance industry, focusing on verifying the five major links of hazardous waste collection, storage, management, transportation, and disposal. These measures are driving the hazardous waste management in the automotive maintenance industry from "extensive" to "standardized".

本文由危废暂存库友情奉献.更多有关的知识请点击:http://www.tdyhhb.com我们将会对您提出的疑问进行详细的解答，欢迎您登录网站留言.

This article is a friendly contribution from the hazardous waste temporary storage warehouse For more information, please click: http://www.tdyhhb.com We will provide detailed answers to your questions. You are welcome to log in to our website and leave a message