胶粘剂生产过程中的voc废气排放量较高，有必要对于这部分废气进行收集处理，这样可以改善车间内部的工作环境，也可以达到大气排放标准，本文由昆山鑫蓝环保小编带您了解一下胶粘制品废气处理采用的方法吧。

The VOC exhaust emissions during the adhesive production process are relatively high, and it is necessary to collect and treat this part of the exhaust gas. This can improve the working environment inside the workshop and meet the atmospheric emission standards. This article is led by Kunshan Xinlan Environmental Protection Editor to introduce the methods used for the treatment of adhesive product exhaust gas.

一、活性炭吸附箱：活性炭是一种多孔的含碳物质，其发达的空隙结构使它具有很大的表面积，所以很容易与空气中的有毒有害气体充分接触，活性炭孔周围强大的吸附力场会立即将有毒有害气体分子吸入孔内，从而达到净化有机废气的目的。

1、 Activated carbon adsorption box: Activated carbon is a porous carbon containing substance with a developed pore structure that gives it a large surface area, making it easy to come into full contact with toxic and harmful gases in the air. The strong adsorption force field around the activated carbon pores will immediately suck toxic and harmful gas molecules into the pores, thereby achieving the goal of purifying organic waste gas.

二、催化燃烧设备：催化燃烧能解决有机废气污染问题，有机废气在温度相对较低（与直接燃烧温度相比）的情况下，完全氧化成二氧化碳和水，无任何中间产物。可以很好地处理胶粘制品行业废气。催化燃烧与其他废气处理设备相比如下，传统的活性炭吸附，是将污染物转移，气态被活性炭吸附后成固体，活性炭饱和后将无吸附能力，此时需要更换活性炭，且原有的活性炭变成危废，处理成本高。

2、 Catalytic combustion equipment: Catalytic combustion can solve the problem of organic waste gas pollution. Organic waste gas is completely oxidized into carbon dioxide and water at relatively low temperatures (compared to direct combustion temperature), without any intermediate products. It can effectively treat the waste gas from the adhesive products industry. Compared with other exhaust gas treatment equipment, catalytic combustion uses traditional activated carbon adsorption to transfer pollutants. The gas is adsorbed by activated carbon and becomes a solid. When activated carbon becomes saturated, it has no adsorption capacity and needs to be replaced. Additionally, the original activated carbon becomes hazardous waste, resulting in high treatment costs.