催化燃烧设备氧化法就是将VOCs工业三废在较低条件下进行氧化焚烧，在金属催化机理下转化成CO2和H2O。这类有机废气治理方法的主要特征取决于，在具体运行中，对预热温度的要求不高，VOCs工业三废处在无焰燃烧情况，进行净化后的阶段处在无焰燃烧情况，这样既可以提升有机废气处理的稳定性，又可对VOCs工业三废进行合理浓度和发热量操纵，从而减少有机废气处理费用。

The oxidation method of catalytic combustion equipment is to oxidize and incinerate VOCs industrial three wastes under lower conditions, and convert them into CO2 and H2O under metal catalytic mechanism. The main characteristics of this type of organic waste gas treatment method depend on the fact that in specific operation, the requirement for preheating temperature is not high, and the VOCs industrial three wastes are in a flameless combustion state. After purification, the stage is in a flameless combustion state, which can not only improve the stability of organic waste gas treatment, but also control the concentration and heat generation of VOCs industrial three wastes reasonably, thereby reducing the cost of organic waste gas treatment.

现在国内过去的工业有机废气处理阶段所采用的催化燃烧设备法存在一定的缺陷，一方面，当催化剂载体与工业三废中的重金属、卤素灯泡和硫酸盐等物质混合均匀，及易发生无效状况，另一方面，当整治之后的VOCs工业三废浓度值比较低或气旋过大时，仅依靠易燃物点燃放热反应就难以维持催化剂载体料层所需要的净化的作用环境温度，因而，在设备打开、运行中还需耗费比较多的电力能源或然料。

The catalytic combustion equipment method used in the treatment of industrial organic waste gas in the past in China has certain defects. On the one hand, when the catalyst carrier is uniformly mixed with heavy metals, halogen bulbs, sulfates and other substances in the industrial three wastes, it is prone to ineffective situations. On the other hand, when the concentration of VOCs industrial three wastes after treatment is relatively low or the cyclone is too large, it is difficult to maintain the purification environment temperature required by the catalyst carrier material layer solely relying on the ignition and heat release reaction of flammable materials. Therefore, a considerable amount of electrical energy or materials is required during equipment opening and operation.

为提升催化燃烧设备技术处理的经济性，除了继续科学研究改善催化剂载体性能外，还需要开展新技术的研究和探索。近些年科学研究比较多的是凭借储热技术性，转为催化燃烧设备技术性，转为催化燃烧设备技术性从技术上具备独特优势，在环境保护工程、低质量资源利用等多个方面有着大量的运用，海外已把它现代化，目前有数百台设备投入使用。

In order to improve the economic efficiency of catalytic combustion equipment technology processing, in addition to continuing scientific research to improve the performance of catalyst carriers, it is also necessary to carry out research and exploration of new technologies. In recent years, there has been a significant shift in scientific research from thermal storage technology to catalytic combustion equipment technology, which has unique advantages in terms of technology. It has been widely used in various fields such as environmental protection engineering and low-quality resource utilization. It has been modernized overseas and currently has hundreds of devices in use.