根据相关规范，医疗危废暂存库的分区要求主要包括以下内容：

　　According to relevant regulations, the zoning requirements for medical hazardous waste temporary storage warehouses mainly include the following:

　　分区隔离要求

　　Partition isolation requirements

　　贮存库内不同贮存分区之间需采取物理隔离措施，可采用过道、隔板或隔墙等方式实现。对于易产生粉尘、挥发性有机物（VOCs）等有害气体的危险废物，需设置独立分区并安装气体收集净化装置。

　　Physical isolation measures should be taken between different storage zones in the storage warehouse, which can be achieved through corridors, partitions, or walls. For hazardous waste that is prone to generate harmful gases such as dust and volatile organic compounds (VOCs), independent zones must be established and gas collection and purification devices must be installed.

　　液态废物与渗滤液处理

　　Liquid waste and leachate treatment

　　贮存液态或可能产生渗滤液的危废时，需设置液体泄漏堵截设施（如围堰、导流沟），其最小容积需不小于对应区域最大容器容积或总储量的1/10（取较大值）。

　　When storing liquid or hazardous waste that may produce leachate, liquid leakage interception facilities (such as cofferdams, diversion ditches) should be installed, with a minimum volume of not less than 1/10 of the maximum container volume or total storage capacity of the corresponding area (whichever is greater).

　　贮存可能产生渗滤液的危废区域，必须设计渗滤液收集设施，容积需满足实际收集需求。

　　Storage of hazardous waste areas that may generate leachate requires the design of leachate collection facilities with a capacity that meets actual collection needs.

　　防渗与防漏措施

　　Anti leakage and leak prevention measures

　　地面需硬化并涂覆耐腐蚀环氧树脂（厚度≥2mm），无裂隙。

　　The ground needs to be hardened and coated with corrosion-resistant epoxy resin (thickness ≥ 2mm) without cracks.

　　存放固态/半固态危废的仓库应设置防泄漏托盘、导流沟渠及收集池（容积≥最大容器量或总储量的1/5）。

　　Warehouses storing solid/semi-solid hazardous waste should be equipped with leak proof trays, diversion channels, and collection tanks (with a capacity ≥ 1/5 of the maximum container capacity or total storage capacity).

　　气体排放控制

　　Gas emission control

　　易产生有害气体的危废贮存区需配备气体收集装置和净化设施，排气筒高度需符合《大气污染物综合排放标准》（GB16297-1996）。

　　Hazardous waste storage areas that are prone to producing harmful gases must be equipped with gas collection devices and purification facilities, and the height of exhaust pipes must comply with the Comprehensive Emission Standards for Air Pollutants (GB16297-1996).

　　标签与标志

　　Labels and logos

　　每个贮存分区入口处需设置分区标志，标明废物类别、应急物资位置及进出口方向。

　　A partition sign should be set up at the entrance of each storage zone, indicating the type of waste, the location of emergency supplies, and the direction of import and export.

　　危废包装容器需张贴二维码标签，包含废物名称、类别、代码、重量等信息。

　　Hazardous waste packaging containers must be labeled with QR code tags, including waste name, category, code, weight, and other information.

　　其他管理要求

　　Other management requirements

　　贮存点实时贮存量不得超过3吨，且需与其他区域隔离。

　　The real-time storage capacity of the storage point shall not exceed 3 tons and shall be isolated from other areas.

　　仓库内需配置防爆照明、监控系统及应急物资，并建立贮存台账。

　　Explosion proof lighting, monitoring systems, and emergency supplies need to be installed in the warehouse, and a storage ledger should be established.

　　以上要求依据《危险废物贮存污染控制标准》（GB18597-2023）及配套技术规范制定，具体实施时需结合危废特性（如腐蚀性、毒性）调整防渗、防泄漏等细节。

　　The above requirements are formulated in accordance with the "Pollution Control Standards for Hazardous Waste Storage" (GB18597-2023) and supporting technical specifications. The specific implementation needs to be adjusted based on the characteristics of hazardous waste (such as corrosiveness and toxicity) to prevent seepage and leakage.

　　本文由 医疗危废暂存库 友情奉献.更多有关的知识请点击  http://www.tdyhhb.com/   真诚的态度.为您提供为全面的服务.更多有关的知识我们将会陆续向大家奉献.敬请期待.

　　This article is a friendly contribution from the medical hazardous waste temporary storage warehouse For more related knowledge, please click http://www.tdyhhb.com/ Sincere attitude To provide you with comprehensive services We will gradually contribute more relevant knowledge to everyone Coming soon.