地图 - 热线
- 服务热线 - 15392885678 15069779222
当处理风量进一步提升(达到50,000m?/h以上)、浓度波动剧烈、或废气成分复杂不适合催化燃烧时,沸石转轮+RTO组合便成为更优选择。这套系统将沸石转轮的吸附浓缩能力与蓄热式焚烧炉(RTO)的高热回收效率相结合,堪称“大风量低浓度VOCs治理的重型武器”。
When the processing air volume further increases (reaching over 50000m ³/h), the concentration fluctuates violently, or the exhaust gas composition is complex and not suitable for catalytic combustion, the zeolite wheel+RTO combination becomes a better choice. This system combines the adsorption and concentration capacity of zeolite rotors with the high heat recovery efficiency of thermal storage incinerators (RTOs), making it a "heavy weapon for high air volume and low concentration VOCs treatment".
一、使用范围:面向超大风量、宽谱系工况
1、 Scope of use: Suitable for ultra high air volume and wide spectrum working conditions
该工艺与沸石转轮+CO的应用领域有重叠,但RTO在处理风量上限、废气组分适应性、连续运行工况上更具优势。非常适合大风量(≥100,000m?/h)、低浓度(温度<50℃、湿度<90%RH)的工况。
This process overlaps with the application fields of zeolite wheel+CO, but RTO has more advantages in terms of upper limit of air flow, adaptability of exhaust gas components, and continuous operation conditions. The most suitable working conditions are high air volume (≥ 100000m ³/h) and low concentration (temperature<50 ℃, humidity<90% RH).
适用有机组分包括苯系物、醇、酮、醛、酯类等常见VOCs。典型行业包括:印刷、大型喷涂车间(如汽车整车涂装)、医药与农药制造、半导体及电子产品制造等。
Applicable organic components include common VOCs such as benzene derivatives, alcohols, ketones, aldehydes, esters, etc. Typical industries include printing, large-scale spray painting workshops (such as automotive vehicle painting), pharmaceutical and pesticide manufacturing, semiconductor and electronic product manufacturing, etc.
RTO对VOCs组分和浓度波动不敏感,因此适用于废气成分复杂、浓度波动较大的场合。不适合高沸点聚合物、UV漆、固化剂等易堵塞蓄热体的工况,同时含汞、铅、锡、锌、磷、砷等会造成催化剂中毒的物质同样需要注意。

RTO is insensitive to VOCs components and concentration fluctuations, making it suitable for situations where exhaust gas components are complex and concentration fluctuations are significant. Not suitable for working conditions such as high boiling point polymers, UV paints, curing agents, etc. that are prone to clogging the heat storage body, and substances containing mercury, lead, tin, zinc, phosphorus, arsenic, etc. that can cause catalyst poisoning also need to be taken into account.
二、核心工艺与优势
2、 Core processes and advantages
工作原理:废气经转轮浓缩后,脱附出的高浓度气体进入RTO,在760-800℃以上的高温环境中将有机物氧化分解为CO?和H?O。核心在于RTO内部蓄热陶瓷体对燃烧热的快捷回收,使系统在维持高温的同时大幅降低燃料消耗。
Working principle: After the exhaust gas is concentrated by the impeller, the high concentration gas desorbed enters the RTO and oxidizes and decomposes organic matter into CO? And H? O in a high temperature environment above 760-800 ℃. The core lies in the efficient recovery of combustion heat by the internal thermal storage ceramic body of RTO, which greatly reduces fuel consumption while maintaining high temperature in the system.
核心优势:
Core advantages:
出众净化效率:系统整体净化率一般在98%以上,经转轮浓缩后甚至可达更高水平。
Ultimate purification efficiency: The overall purification rate of the system is generally above 98%, and even higher levels can be achieved after being concentrated by the impeller.
热回收率出众:RTO采用多室或旋转式蓄热结构,热回收率可达95%以上,是CO(约65%)无法比拟的。
Extremely high heat recovery rate: RTO adopts multi chamber or rotary thermal storage structure, with a heat recovery rate of over 95%, which is incomparable to CO (about 65%).
高浓缩倍数降低后处理成本:浓缩倍数5-20倍,出彩大地缩小了RTO设备规格,降低投资和运行成本。
High concentration factor reduces post-treatment costs: The concentration factor is 5-20 times, greatly reducing the specifications of RTO equipment and lowering investment and operating costs.
适应性强:对VOCs组分和浓度波动不敏感,维护工作量少、安全可靠,设备使用寿命长。
Strong adaptability: insensitive to fluctuations in VOCs components and concentrations, low maintenance workload, safe and reliable, and long equipment service life.
废气净化有效:燃烧产物仅CO?和H?O,无二次污染。
Thorough exhaust gas purification: The combustion products are only CO? And H? O, with no secondary pollution.
航天凯天环保提供的选型表显示,旋转式RTO处理50,000m?/h风量时,燃烧器功率为2800kcal/h,外形尺寸为16×9×8米,证明了该技术在大风量场景下的成熟度。
The selection table provided by Aerospace Kaitian Environmental Protection shows that when the rotary RTO is used to process an air flow of 50000m ³/h, the burner power is 2800kcal/h and the external dimensions are 16 × 9 × 8 meters, proving the maturity of this technology in high air flow scenarios.
截屏,微信识别二维码